Posted by Lawrence Ober on January 12, 2001 at 16:02:58:
In Reply to: Re: Need flash bracket screw for Pacemaker Crown posted by Carl Vogt on January 12, 2001 at 04:11:48:Carl,
I bought a bag of assorted 2-56 screws at Radio Shack. The original was only 1/8" - not very reassuring. I used a pair of 2-56 x 1/4 screws on the bottom and they fit fine. Many thanks.
Larry
: Lawrence,
: I checked out the the size of the screw you mentioned on my
camera. Appears to be a 2-56 pan head screw about 3/16 in length. I
had a 2-56 1/4 seemed to work ok also.
: Now if you just want to get the camera functional
: with all three screws, you can find a useable screw of this size
at most hardware stores or Radio Shack (take one of the screws with
you for comparison). I would replace all 3 screws with the same
type new screw Save the Original Screws untill you can find another
OEM screw.
: The link to Commercial Sites will show some links to sources of
Graflex Parts, they may help you with getting an Original Equipment
Manufacture screw.
: Hope this helps
: Carl