Posted by Jim Tetz on September 04, 2000 at 15:19:15:
In Reply to: Re: Grafmatic problem posted by Tony Brent on August 31, 2000 at 21:08:54:
: I have had to do that with most of mine. The
: metal plate would jam the mechanism.
: Not a difficult job. Just keep track of how things
: came apart and don't lose the screws.
: I used Pliobond on both the plate and the body of
: the magazine to glue the plate back in. My felts
: were in good shape. You can find felt in the
: five-and-dime. It is a light trap, so make sure
: it is the same thickness.
To Bert Saunders :
Thank you Tony for your response. I took the film holder apart by
unscrewing 3 screws on each side, and was able to see clearly where
the light trap was to go. I glued it back into place, the key was
to not place glue over the magnetic numbering wheel. It works fine,
and now just needs to be tested with film. There is no visible
light leak when held up to a strong light. Thank you again. Jim
Tetz