Graflex.org

jimmk · Joined: 30 Mar 2003 Posts: 5 Location: Washington DC

I have a 101 mm f4.5 lens and want to get some BW filters. The lens seems to measure about 30 mm diameter. Can anyone verify this for me? Many thanks

worldphoto · Posted: Fri May 30, 2003 3:47 am Post subject:

I use the following on my 101mm f4.5:
Kodak Series VI Adapter Ring 1-1/4 IN.-31.5mm
Harry
P.S. Then I use a step-up ring, Series VI to VII. My lens is a Kodak Ektar.

[ This Message was edited by: worldphoto on 2003-05-29 20:56 ]

blowupinc · Joined: 03 Jun 2003 Posts: 11 Location: Baltimore MD USA

I also have a Ektar 101 lens for my baby graphic. The thread size for mine is indeed a 30mm thread. You can find retaining rings for series V on ebay. But alot of times the seller will not be able to give you an accruate measurement or give you the wrong measurement. You may need to buy a couple of lots before you get what you need. Good luck. Series V has many filters still availible. As well as set up adapter rings.
________
half-baked