Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

neck strap for 4x5 anniversary speed?

 
Post new topic   Reply to topic    Graflex.org Forum Index -> Speed Graphic Help
View previous topic :: View next topic  
Author Message
Daniel Buck



Joined: 16 Apr 2008
Posts: 10
Location: Culver City, CA

PostPosted: Wed Apr 16, 2008 9:14 pm    Post subject: neck strap for 4x5 anniversary speed? Reply with quote

Hello, I'm making my way into speed graphic shooting (from 4x5 and 8x10), something that I would like to have is a neck/sholder strap. I don't see any way of mounting a strap onto the camera though, does anyone have any ideas on how to do this?
Back to top
View user's profile Send private message
alecj



Joined: 09 May 2001
Posts: 853
Location: Alabama

PostPosted: Wed Apr 16, 2008 10:09 pm    Post subject: Reply with quote

Well I can think of two ways, based on a Banks Accessory Harness I found years ago.

You could use a large strap with snap hooks on the ends. The hooks would connect into the upper strap lug on the left side of the camera [handstrap removed], and the right would connect into the upper portion of the flash bracket [if so installed on the rangefinder] on the right side of the camera. Of course, that precludes use of the flash gun when used that way.

That strap also used the strap [it was fairly long] to hook onto rings on each end of a camera plate [slightly longer than the camera bottom] that attached underneath the camera's bottom to the camera via a tripod screw.

My strap has an expandable extension that goes around behind the user at chest level holding the camera close to the body until use. I couldn't pass it up at the time, but I've never actually worn the strap with the camera.

These suckers are heavy. What's the matter with just using the hand strap as it was designed for?
Back to top
View user's profile Send private message
Daniel Buck



Joined: 16 Apr 2008
Posts: 10
Location: Culver City, CA

PostPosted: Wed Apr 16, 2008 10:26 pm    Post subject: Reply with quote

alecj wrote:
Well I can think of two ways, based on a Banks Accessory Harness I found years ago.

You could use a large strap with snap hooks on the ends. The hooks would connect into the upper strap lug on the left side of the camera [handstrap removed], and the right would connect into the upper portion of the flash bracket [if so installed on the rangefinder] on the right side of the camera. Of course, that precludes use of the flash gun when used that way.

That strap also used the strap [it was fairly long] to hook onto rings on each end of a camera plate [slightly longer than the camera bottom] that attached underneath the camera's bottom to the camera via a tripod screw.

My strap has an expandable extension that goes around behind the user at chest level holding the camera close to the body until use. I couldn't pass it up at the time, but I've never actually worn the strap with the camera.

These suckers are heavy. What's the matter with just using the hand strap as it was designed for?


Thanks for the suggestions, I'll look into them As for neck/shoulder strap versus the hand strap, for something this heavy i like to put the weight on my shoulder (like it's a shoulder bag) when I'm out hiking. Rather than always having it in my hand.
Back to top
View user's profile Send private message
Les



Joined: 09 May 2001
Posts: 2682
Location: Detroit, MI

PostPosted: Thu Apr 17, 2008 2:27 am    Post subject: Reply with quote

For "tailgate hiking" (not getting more than 200ft off the road) The camera, one holder in the camera and one holder in the small of my back,held there by my belt is all that I take, and for the 10-30minutes I'm out, hand holding the camera isn't a problem.

For more rigorous hiking (up Diamond Head in Hawaii) You'll need more than just the camera, which is why I went with full backpack. I'm a middle aged, over weight, out-of-shape white guy, but my Lowe-pro pack allows me to carry up to 30 pounds with little or no fatigue, for a couple of hours, be it on the trails in Ohau, or walking the Brooklyn Bridge and exploring lower Manhattan.
_________________
"In order to invent, you need a good imagination and a lot of junk" Thomas Edison
Back to top
View user's profile Send private message
michael roberts



Joined: 08 Sep 2007
Posts: 5
Location: Wondervu, Colorado

PostPosted: Wed Apr 23, 2008 12:45 am    Post subject: shoulder strap alternative Reply with quote

Instead of a shoulder strap on the camera, I use a small soft insulated cooler. The main compartment just fits the camera and there is a separate zippered section on top that holds two extra lenses. Very compact.
-Michael
Back to top
View user's profile Send private message
michael roberts



Joined: 08 Sep 2007
Posts: 5
Location: Wondervu, Colorado

PostPosted: Wed Apr 23, 2008 12:47 am    Post subject: strap Reply with quote

Forgot to mention: the cooler has a nylon strap long enough to use as a shoulder strap.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Speed Graphic Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group