Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Lens mounting diameter size

 
Post new topic   Reply to topic    Graflex.org Forum Index -> Lenses Help
View previous topic :: View next topic  
Author Message
braxus



Joined: 05 Mar 2005
Posts: 7

PostPosted: Sun Mar 06, 2005 1:25 am    Post subject: Reply with quote

I did some searching, but just want to confirm my info. I have a 4x5 Speed Graphic which had the Optar 135mm lens on it. I bought a Ektar 127mm f 4.7 lens to replace the Optar. The Optar hole size is 1 5/16 inches on my board, which if my info is correct is a Copal #0 hole size. I'm reusing my lens board from the Optar to the Ektar and I'm wondering if the Ektar will fit into the hole size for the Optar, or if some resizing will be needed. I read the Ektar may also be a Copal #0 size, but I just want to confirm this is correct.

[ This Message was edited by: braxus on 2005-03-05 20:33 ]
Back to top
View user's profile Send private message
braxus



Joined: 05 Mar 2005
Posts: 7

PostPosted: Sun Mar 06, 2005 2:23 am    Post subject: Reply with quote

The Copal size is either 32mm or 36mm. I'm guessing 32mm. That converts to my 1 5/16 inch measurement. If anyone knows the hole size for their Ektar 127mm let me know. Thanks again.


[ This Message was edited by: braxus on 2005-03-05 20:36 ]
Back to top
View user's profile Send private message
worldphoto



Joined: 05 Feb 2003
Posts: 199
Location: Southern California

PostPosted: Sun Mar 06, 2005 7:29 am    Post subject: Reply with quote

Mine is 32mm
Back to top
View user's profile Send private message
Sonnar



Joined: 04 Mar 2005
Posts: 3
Location: Germany

PostPosted: Sun Mar 06, 2005 1:06 pm    Post subject: Reply with quote

My is 38mm (Ektar 127mm/ f:4.7, S/N RE....) shutter is a SynchroCompur with T, B, 1.1/400s

cheers Frank
Back to top
View user's profile Send private message
braxus



Joined: 05 Mar 2005
Posts: 7

PostPosted: Sun Mar 06, 2005 3:40 pm    Post subject: Reply with quote

Ok. Thanks guys. I guess it can vary between those two sizes. I'll have to see when mine arrives. Mine is in the S. Compur shutter. I know Copal #1 is 42mm, so I wonder where 38mm fits in if Copal #0 is 32mm?

I'll have to see the best way to get the hole machined bigger if it is the larger size. I know a machine shop locally I could probably get it done at.

[ This Message was edited by: braxus on 2005-03-06 07:49 ]
Back to top
View user's profile Send private message
TiltallED



Joined: 14 Mar 2005
Posts: 9
Location: Pacific NW, Olympic Peninsula

PostPosted: Sun Mar 20, 2005 8:30 pm    Post subject: Reply with quote

The Graflex lens by Wollensak, made the Raphax shutters the # 2 was 36.5 mm.
and a 38 mm. hole in the #0 board. The #00 board hole, 33.3 - 34 mm.

And 1 5/16" = 1.312" to convert to mm. , multiply by 25.4

A good source for measuring tools, etc.
www.grizzly.com
and thier catalog is free too!.








_________________
"Only you can capture a moment of time, in a fraction of time on film, with only your, eye, finger and camera!.....Why wait!!"
Speed Graphic 4X5in.
Pentax 6X7cm.
Canon A1-AE1 35mm.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Lenses Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group