Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Need Info with these lenses!!!
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Graflex.org Forum Index -> Lenses Help
View previous topic :: View next topic  
Author Message
musashi



Joined: 16 Feb 2004
Posts: 17
Location: Colombia / South America

PostPosted: Sat Jun 26, 2004 6:41 am    Post subject: Reply with quote

Hi Everyone!!!
I found these lenses and I need Info. Are they good?? Should I buy them?? Thanks for your precious Help!!
The lenses are:
- Vöigtlander TELOMAR 24cm f/5.5
- Rodenstock WELTWINKEL PERIGON 90mm f/12
- C.P Goertz AM.OPT.CO W.A Dagor 3 5/8 Inch
f/8 Mounted on a RAPAX (By Wollensack) Shutter.

Once again... Thanks everybody!!!
Back to top
View user's profile Send private message Send e-mail
Dan Fromm



Joined: 14 May 2001
Posts: 2144
Location: New Jersey

PostPosted: Sat Jun 26, 2004 10:28 am    Post subject: Reply with quote

Quote:

On 2004-06-25 23:41, musashi wrote:
Hi Everyone!!!
I found these lenses and I need Info. Are they good?? Should I buy them?? Thanks for your precious Help!!
The lenses are:
- Vöigtlander TELOMAR 24cm f/5.5
- Rodenstock WELTWINKEL PERIGON 90mm f/12
- C.P Goertz AM.OPT.CO W.A Dagor 3 5/8 Inch
f/8 Mounted on a RAPAX (By Wollensack) Shutter.

Once again... Thanks everybody!!!
All have very good reputations and should be useful. Note that the Perigon is quite slow -- I think you made a typo in the speed, as you did with the Dagor -- and the same focal length as the Dagor. If you're shooting 4x5, get the Dagor to use and, if the price is low, get the Perigon as a speculation.
Back to top
View user's profile Send private message
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Sat Jun 26, 2004 11:14 am    Post subject: Reply with quote

Would the short Dagor actually cover 4x5?
Back to top
View user's profile Send private message
primus96



Joined: 13 Nov 2003
Posts: 225
Location: Yorkshire, United Kingdom

PostPosted: Sat Jun 26, 2004 11:53 am    Post subject: Reply with quote

I believe the W.A. Dagor covers 70deg as opposed to 60deg for the usual Series 3 and is slower(f as opposed to f6.8 for the normal Dagor. If I am right your lens has a image circle of approx 120mm. This means it won't cover 4x5 but will do fine with the rollfilm adapter and accomodate any movements you desire.
Back to top
View user's profile Send private message
Dan Fromm



Joined: 14 May 2001
Posts: 2144
Location: New Jersey

PostPosted: Sat Jun 26, 2004 5:31 pm    Post subject: Reply with quote

Quote:

On 2004-06-26 04:53, primus96 wrote:
I believe the W.A. Dagor covers 70deg as opposed to 60deg for the usual Series 3 and is slower(f as opposed to f6.8 for the normal Dagor. If I am right your lens has a image circle of approx 120mm. This means it won't cover 4x5 but will do fine with the rollfilm adapter and accomodate any movements you desire.
Not to disagree strongly because I have no experience with the lens and my source, the Vade Mecum, is sometimes wrong, but it says that f/8 Dagors cover 100 degrees.

It says that Perigons cover around 90 degrees.

So both of these beasts will do for 4x5.

The real question is whether the price is low enough that they can be disposed of, if not, after all, wanted at minimal loss. OTOH, if these things are on eBay, the Perigon will bring a fair amount.

Cheers,

Dan
Back to top
View user's profile Send private message
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Sat Jun 26, 2004 7:52 pm    Post subject: Reply with quote

I remembered 80 degrees for the WA dagor. Doing a little looking it seems

F/22 80 degrees
F/45 100 degrees.

Only 70 degrees at F/8.

To me that means you'll have trouble focussing at F/8. Even F/22 won't cover the corners with any movement. But if a person would like focussing at F/45 it's fine. Reminds me why I passed on one last year.
Back to top
View user's profile Send private message
musashi



Joined: 16 Feb 2004
Posts: 17
Location: Colombia / South America

PostPosted: Mon Jun 28, 2004 2:06 am    Post subject: Reply with quote

Thanks to everyone!!!
The fact is that the Perigon and the Dagor are basically at the same Price. So... Which one do you think I must pick first??
Which one is better???
Will they work for my 4x5"??

Sorry to bother, but you are the best resource I have.

Back to top
View user's profile Send private message Send e-mail
Dan Fromm



Joined: 14 May 2001
Posts: 2144
Location: New Jersey

PostPosted: Mon Jun 28, 2004 8:36 am    Post subject: Reply with quote

Quote:

On 2004-06-27 19:06, musashi wrote:
Thanks to everyone!!!
The fact is that the Perigon and the Dagor are basically at the same Price. So... Which one do you think I must pick first??
Which one is better???
Will they work for my 4x5"??

Sorry to bother, but you are the best resource I have.


If it were my money, I'd buy the Perigon first because it is rarer. Both should work on 4x5.

Bear in mind that thanks to the postal system and eBay Colombia is not cut off from the rest of the world. If you get a lens and don't like it AND it is in good order, you should be able to recover much, if not all and then some, of your investment, by selling it on eBay.

About resources. I like http://www.graflex.org, but there are other places to look for information on and advice about large-format equipment. Try http://www.largeformatphotography.info/lfforum/
and the large format forum on http://www.photo.net too.

Its been a while since I did a google search on rodenstock and perigon. Have you tried that?

Cheers,

Dan
Back to top
View user's profile Send private message
musashi



Joined: 16 Feb 2004
Posts: 17
Location: Colombia / South America

PostPosted: Sun Jul 11, 2004 1:55 am    Post subject: Reply with quote

Dann, Thanks a lot.
I think I'll go for the Perigon. I'm not use to it's size. It's rather small in my opinion, but I'll just give it a try.

The Dagor goes to a Friend of mine who has a Toyo 45 CF. I hope It work for him as well as mine.

I'll run test on both of them and I'll let you know about the results.



Back to top
View user's profile Send private message Send e-mail
musashi



Joined: 16 Feb 2004
Posts: 17
Location: Colombia / South America

PostPosted: Wed Sep 01, 2004 1:26 pm    Post subject: Reply with quote

At Last I have the Perigon!!!
I tested it, but...
When I'm focusing with it at infinity, The short focal distance leaves the lensboard, inside the Camera body. This fact does not allowed me to do any "movements"
I never had a 90mm before, so...

My concern is:
All the 90mm will have the same problem???
My Camera is a Pacemaker Speed Graphic (4x5")

Sorry for the stupid question, but I'm learning every day with these cameras!!!

Thanks a lot!!!
Back to top
View user's profile Send private message Send e-mail
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Wed Sep 01, 2004 2:25 pm    Post subject: Reply with quote

Quote:

On 2004-09-01 06:26, musashi wrote:
At Last I have the Perigon!!!
I tested it, but...
When I'm focusing with it at infinity, The short focal distance leaves the lensboard, inside the Camera body. This fact does not allowed me to do any "movements"
I never had a 90mm before, so...

My concern is:
All the 90mm will have the same problem???
My Camera is a Pacemaker Speed Graphic (4x5")



Measure how far it is from the ground glass to the lensboard. Some lenses have longer flange distances [The distance from the film plane to the flange]. I'm thinking about the Nikon 90mm F/8 which needs about 100mm to focus at infinty. Some older lenses might be closer to 90mm.

The obvious answer to your question is a recessed lensboard. But they can be a pain to use.
Back to top
View user's profile Send private message
musashi



Joined: 16 Feb 2004
Posts: 17
Location: Colombia / South America

PostPosted: Wed Sep 01, 2004 2:42 pm    Post subject: Reply with quote

Thanks Nick!!
I'll search for the Nikon 90mm then.

I'm not really into the recessed lensboard for now.


Back to top
View user's profile Send private message Send e-mail
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Wed Sep 01, 2004 3:17 pm    Post subject: Reply with quote

Measure first. It might not be any better then what you have now.
Back to top
View user's profile Send private message
Les



Joined: 09 May 2001
Posts: 2682
Location: Detroit, MI

PostPosted: Wed Sep 01, 2004 3:36 pm    Post subject: Reply with quote

Quote:

On 2004-09-01 08:17, Nick wrote:
Measure first. It might not be any better then what you have now.


that's good, because recessed lensboards don't work on Speed Graphics, the back of the front standard has a hole that makes it impractical.

Les
Back to top
View user's profile Send private message
t.r.sanford



Joined: 10 Nov 2003
Posts: 812
Location: East Coast (Long Island)

PostPosted: Thu Sep 02, 2004 1:42 am    Post subject: Reply with quote

The hole is straight-sided, 2-15/16 ins. on a side, with rounded corners. I haven't tried it, but I think a shallow cylindrical cup about 2-7/8 ins. in diameter and perhaps an inch or an inch and a half deep, formed of thin sheet metal, could be mounted behind a "Pacemaker" lensboard to carry one of the old, diminutive wide angle lenses (a 75mm. f:9 "W.A. Dagor," for example) in a small shutter. I think it would leave you room to reach in and set the shutter, and to attach an offset cable release extension.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Lenses Help All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group