Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Proper use of wire frame finder and rangefinder usefulness

 
Post new topic   Reply to topic    Graflex.org Forum Index -> Speed Graphic Help
View previous topic :: View next topic  
Author Message
jmanz



Joined: 10 Mar 2004
Posts: 4
Location: Central Florida

PostPosted: Wed Mar 10, 2004 2:19 pm    Post subject: Reply with quote

I'm intrested in how to properly use the wire frame finder on a Crown Graphic. i.e do you center the round reticle in the rectangular frame? or do you place you eye as close as possible to the reticle and center the rectangular frame w/in the circle of the reticle? Also how useful if the range finder? Is scale focusing suitable for subjects 10 feet or further from the camera ? I'm just trying to figure out if it is worth the expense and effort to have the rangefinder adjusted.
Back to top
View user's profile Send private message Send e-mail
Henry



Joined: 09 May 2001
Posts: 1648
Location: Allentown, Pennsylvania

PostPosted: Wed Mar 10, 2004 4:08 pm    Post subject: Reply with quote

Based only on my experience, here are the answers to your questions, in order: yes, yes again, very, yes. Keep in mind that what you see in the wire frame finder is only an approximation of what will register on the negative. Take a few shots of some varied subject matter and keep notes as you go with regard to what you (thought you) saw in the finder and what the film caught.

Adjusting the rangefinder is not that big of a deal; there are instructions somewhere on this board, I think. Once you have the rangefinder properly calibrated with your normal taking lens, you'll find it indispensible. I was once shooting an interior detail at a distance of about eight feet in a situation of almost pitch black darkness, where focussing on the ground glass was out of the question. But I was able to focus precisely with the Kalart and a flashlight aimed at the subject (another way is to aim the flashlight from the subject to the lens/ground glass and focus on the light spot, but that requires two people or some place to wedge your flashlight while you focus). By the way, that was a long exposure shot on b/w chromogenic roll film, lit by multiple flashes from a Vivitar 2800.

Good luck and happy shooting!

[ This Message was edited by: Henry on 2004-03-10 08:11 ]
Back to top
View user's profile Send private message
t.r.sanford



Joined: 10 Nov 2003
Posts: 812
Location: East Coast (Long Island)

PostPosted: Wed Mar 10, 2004 5:41 pm    Post subject: Reply with quote

Ditto that. The frame finder is one of the earliest viewfinder designs, and one of the best, especially if you use the parallax correction feature provided on the lower limb of the vertical frame.

Success with scale focusing depends on your ability to estimate distance accurately, but I definitely would adjust the rangefinder.

For focusing in near (or complete) darkness, the old Kalart "Focuspot" is a neat and very workable accessory.
Back to top
View user's profile Send private message
alecj



Joined: 09 May 2001
Posts: 853
Location: Alabama

PostPosted: Thu Mar 11, 2004 4:31 am    Post subject: Reply with quote

You didn't indicate which Graphic you are using. On all Graphics, there is a parallex adjustment which must be made to the sports finder in order that the correct field of view be shown.

On most models, when you pull up the finder, note that there are settings on the side for 8', 15' and infinity. On the later ones, the adjustment is on the eyepiece finder instead.
Back to top
View user's profile Send private message
jmanz



Joined: 10 Mar 2004
Posts: 4
Location: Central Florida

PostPosted: Mon Mar 15, 2004 1:20 pm    Post subject: Reply with quote

Thank you for your replies...I have 2 crowns, 1 Special and 1 Side RF. I will attempt to calibrate my range finder on the side RF crown. Also will search for the missing cam for my Crown Special... I can't wait to do some hand held shooting with these cameras...
Back to top
View user's profile Send private message Send e-mail
bushwickdan



Joined: 07 Aug 2003
Posts: 3
Location: Beacon NY

PostPosted: Wed Mar 17, 2004 12:01 pm    Post subject: Reply with quote

[quote]
On 2004-03-10 08:08, Henry wrote:
By the way, that was a long exposure shot on b/w chromogenic roll film, lit by multiple flashes from a Vivitar 2800.

This intrigued me. Just after I read this email I purchased a used Viv 2800 for 10 bucks on ebay. It's still on the way, but I would like to hear more about how you use it with your graphic.

Dan Rigney
Back to top
View user's profile Send private message
Henry



Joined: 09 May 2001
Posts: 1648
Location: Allentown, Pennsylvania

PostPosted: Sun Mar 21, 2004 9:02 pm    Post subject: Reply with quote

Sorry for the delay in responding; I was out of town for a week.

Congrats on your 2800 Vivitar purchase; if it's in good working order, you got a nice deal there. I have a Century Graphic (2x3) and use 120 roll film exclusively. I soldered together a home-made accessory shoe out of some pieces of brass shapes from the hobby shop, spray-painted it flat black, and mounted it on the top right side of the camera case above the Kalart rangefinder, using a small bracket that came already attached to the camera when I purchased it used. I had Paramount make me up a bipost to Vivitar cord, and I'm good to go with my all my Graphex M-F-X shutters/Optar lenses. Of course for long exposures such as the one I described, you don't hook up the flash, just open the shutter and fire away repeatedly; otherwise you'd use the X-synch setting. Number of flashes with long exposure is mostly by guess, although the chromogenic has such wide exposure latitude that it's not hard to get a printable negative out of almost anything within reason. For more exacting film stock, with shorter shutter times, I use a Gossen Luna-Pro F meter in flash mode to determine exposure. HTH
Back to top
View user's profile Send private message
bushwickdan



Joined: 07 Aug 2003
Posts: 3
Location: Beacon NY

PostPosted: Mon Mar 22, 2004 6:16 am    Post subject: Reply with quote

Wow, thanks Henry. I'm looking forward to pllaying with the eletronic flash. I also have the flashbulb attachment but realize that I wont always be able to get the bulbs. A decent and adjustable flash like the 2800 should fit the bill. Not sure how I will mont it yet, thogh I saw how a friend of mine made a sort of reverse flashgun with pieces of a 2x4 this weekend.

Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Speed Graphic Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group