Re: Checking of Focal Plane shutter is accurate?


[ Follow Ups ] [ Post Followup ] [ Graflex.Org Help Board ] [ Instructions ]

Posted by Pete Gregar on April 27, 2001 at 13:18:06:

In Reply to: Re: Checking of Focal Plane shutter is accurate? posted by Les on April 27, 2001 at 12:03:28:

What is a calumet tester?? Are these expensive?
Maybe I should just shoot some pictures and see the results..

Do I need to make any exposure adjustments when using it vs the lens shutter?

thanks!

: The slow speeds definitely go first and while a typical digital shutter tester can spot check the speed, it's common for the speed of the curtain (and thus the exposure) to vary from top to bottom.

: On most of th eminispeeds I"ve had, a tension of 1 and a T exposure usually resulted in the shutter opening rather quickly and slowing down before wide open hit. When closing (firing on O) most would start to close and then p oop out. At the other end of the scale once the shutter takes of from a dead start, it's common to find the top of the image under exposed (the image is inverted) because of interia.

: there are oscillo scope machines designed to graph the velocity of the shutter, but these are expensive and are only found in major repair facilities.

: The biggest culprit is leaving the wound up. I always set the tension to 1 and leave the shutter to O when not using it.

: I usually test mine with a Calumet tester in the center, then assume the sky will get under exposed which brings out the clouds and the grass will get overexposed which brings out shadow detail.



Follow Ups: