Posted by Carl Vogt on December 25, 2000 at 07:16:34:
In Reply to: Re: New Lens Availability?? posted by Ron Crawford on December 24, 2000 at 10:42:12:Ron,
I have a 90mm Schneider Angulon witch I did have on mounted on a
Graphic lense board. Worked ok on
My Crown Graphic ( I believe the front would close with it on).
Since I always carry my Graflex in the case, and work out of the
case when shooting, it is SOP to put the "normal" lens back on when
putting the camera away. I now have remounted the 90mm on a 4X4
recessed lense board for use on my Graphic View II,
As far a physical limitations, the lense is actually two parts A.
the Shutter and B. The actual lense. looks like the shutter should
be less than 2 1/2 inches in diameter. ( might hit the shutter
release, although this could be temporarly detached for lens use)
and be less than 3/4 inches high. The lens could stick out of the
shutter for a total height of 1 1/4 from the lens board. This
should allow the front to close Note: This is my best guestimation,
you should double check this yourself...
Regards,
Carl