View previous topic :: View next topic |
Author |
Message |
brooklynrocket
Joined: 02 Oct 2008 Posts: 4 Location: NYC
|
Posted: Thu Oct 02, 2008 1:01 am Post subject: unloading a 120 film holder? |
|
|
I just aquired a Graflex XL rangefinder with a 120 film back.
I think I've figured out how to load it properly, but once I've exposed all 10 frames, and the film is now wound around the black plastic spool, how do I unload it correctly?
Thanks! |
|
Back to top |
|
|
glennfromwy
Joined: 29 Nov 2001 Posts: 903 Location: S.W. Wyoming
|
Posted: Thu Oct 02, 2008 1:22 am Post subject: |
|
|
Don't open it until you're sure all the backing paper leader is wound onto the take up spool. Open the back, rotate the take up spool until you see the gummed tape. Wind the gummed strip over the end of the leader, lick and stick. The spool can then be removed by pressing it toward the bottom of the holder. The top of the spool should pop out. Put the empty spool on the take up side and you're ready to load a new roll. _________________ Glenn
"Wyoming - Where everybody is somebody else's weirdo" |
|
Back to top |
|
|
brooklynrocket
Joined: 02 Oct 2008 Posts: 4 Location: NYC
|
Posted: Thu Oct 02, 2008 2:54 am Post subject: Thanks glenn |
|
|
I'll try it asap. |
|
Back to top |
|
|
Henry
Joined: 09 May 2001 Posts: 1642 Location: Allentown, Pennsylvania
|
Posted: Thu Oct 02, 2008 7:07 am Post subject: |
|
|
In the old days, you just sent the camera back to Rochester and let Kodak do it ("you click the shutter, we do the rest"), but glenn'sdirections are right on; once you see how easily it works, you'll love it. Roll film is the greatest! Enjoy it at its best in its twilight years. |
|
Back to top |
|
|
steved55
Joined: 10 Feb 2016 Posts: 15 Location: Penna
|
Posted: Mon Feb 05, 2024 5:15 pm Post subject: |
|
|
Zero help. |
|
Back to top |
|
|
Dan Fromm
Joined: 14 May 2001 Posts: 2135 Location: New Jersey
|
Posted: Tue Feb 06, 2024 1:07 pm Post subject: |
|
|
steved55 wrote: | Zero help. |
??? |
|
Back to top |
|
|
Henry
Joined: 09 May 2001 Posts: 1642 Location: Allentown, Pennsylvania
|
Posted: Tue Feb 06, 2024 4:34 pm Post subject: |
|
|
Dan, Steve is looking for help getting film out of his RH8. There’s a related thread active on the Graflex site discussion board. |
|
Back to top |
|
|
|