aoresteen
Joined: 26 May 2004 Posts: 67 Location: Newnan, GA, USA
|
Posted: Tue Jun 22, 2004 3:01 pm Post subject: |
|
|
I have a Graflex RH50 for the XL. I want to use it on my Cambo 23SF but it's way too large. What I'm thinking of is to adapt it this way:
1. Use a 1" XL spacer. Have SK Grimes modify the camera side of the spacer to fit into a Graflok back (which my Cambo has).
2. Use a Graflex Focusing panel 9283, 9284, or 9276 to focus. I assume that these focusing panels will attach to the film side of the 1" spacer.
3. Remove the focusing panel, attach the RH50, and take pictures.
Am I correct to assume that the RH 50 will attach directly to the 1" spacer? Will the film be in the same plane as the ground glass of the focusing pannel?
If this is correct, any ideas on where I can loacte a spacer and the focusing pannel?\
Thanks for your help!
_________________ Tony Oresteen
Newnan, GA
WWW.oresteen.com |
|