View previous topic :: View next topic |
Author |
Message |
onpic
Joined: 20 Oct 2001 Posts: 2 Location: La Ca
|
Posted: Sat Oct 20, 2001 11:19 pm Post subject: |
|
|
Hi just got a 4x5 RB slr D and wanted to know if anyone knows how to change the back from the old grafic back to the new Graflok back keeping the RB? thanks |
|
Back to top |
|
|
bertsaunders
Joined: 20 May 2001 Posts: 577 Location: Bakersfield California
|
Posted: Sun Oct 21, 2001 5:56 pm Post subject: |
|
|
Onpic--Afraid that you have hit the old brick wall on the change you want--Graflok was never made for these old cameras, for the Speed and Crown types and View cameras only! Can be modified without changing the original setup--but it will be a modified
GraFLEX back--not a GraFLOK!
Bert
Have been restoring these cameras for over 20 years...up until the time I wrote this
totally mistaken blurb.....I had never seen a Graflok back made for a Graflex SLR!! Then when I make a complete fool of myself, they start comming out of the woodwork! Boy is my face red!!!
[ This Message was edited by: bertsaunders on 2003-01-15 19:29 ] |
|
Back to top |
|
|
onpic
Joined: 20 Oct 2001 Posts: 2 Location: La Ca
|
Posted: Sun Oct 21, 2001 7:17 pm Post subject: |
|
|
bret,
how would I do the change? thanks for the info in advance |
|
Back to top |
|
|
bertsaunders
Joined: 20 May 2001 Posts: 577 Location: Bakersfield California
|
Posted: Mon Oct 22, 2001 8:45 pm Post subject: |
|
|
onpic--Assume you ment Bert instead of Bret
email me at
bert@etcrier.net
takes a bit of chit chat to get the job done |
|
Back to top |
|
|
RKnoppow
Joined: 15 May 2002 Posts: 14 Location: Los Angeles
|
Posted: Tue Jul 16, 2002 1:16 pm Post subject: |
|
|
My Super-D has a Graflok back on it, evidently an aftermarket modification. A standard Graflok can be used but one extra screw hole must be drilled in it.
Super-D Graflex's could be special ordered wtih Graflok backs. Most Graflex cameras could be ordered with either Graflex or Graphic backs.
Its necessary to shim the finder ground glass to match the back. The position of the film plane is slightly different.
_________________ Richard Knoppow
Los Angeles, CA USA
dickburk@ix.netcom.com |
|
Back to top |
|
|
vistashift
Joined: 14 Jan 2003 Posts: 6 Location: mid-atlantic
|
Posted: Wed Jan 15, 2003 12:40 am Post subject: |
|
|
i have perfected s modification that is far superior to the factory installaton of the graflox back on a 45 super d. in the fifties when graflex would make the switch or you could order it with the graflok, all that was available to use was the speed graphics oversized one so that hangs over the side. taking the graflok back from a graphic view that arrived later, milling it down, allows it
to fit exactly in the same sq space as the original graflex back, using the same holes to mount it. it cost me $100 +back to have the milling done. Had several done, l left complete with gg glass $225 if that will help.
_________________ rofuerbringer |
|
Back to top |
|
|
|