View previous topic :: View next topic |
Author |
Message |
kendall
Joined: 26 Mar 2002 Posts: 1 Location: Ohio
|
Posted: Tue Mar 26, 2002 8:18 am Post subject: |
|
|
I'm considering buying a used Graphics 4x5 camera. I purchased the Graphic Graflex Photography book (11th edition) to learn more about the different models. In the book it mentions the body release for the Super Graphic is electric. Does this mean that batteries are necessary to operate a Super Graphic? |
|
Back to top |
|
|
Les
Joined: 09 May 2001 Posts: 2682 Location: Detroit, MI
|
Posted: Tue Mar 26, 2002 9:08 am Post subject: |
|
|
Well sort of. On the pacemaker models the body release is a cable and it didn't work well. a lot of photographers like the solenoid still found on the front, not to sync the flash but to trip the shutter. In this case the batteries were part of the graflite flash case.
When they came out with the super Graphic, they incorporated this idea into the camera. In order for it to work you not only need special batteries, but the right lensboard with the copper contacts and the solenoid built in.
However it you want to stick a common repro lensboard with a common shutter in the Super and fire it with your finger or a cable release then no batteries are needed. |
|
Back to top |
|
|
jpmose
Joined: 29 May 2001 Posts: 164 Location: Atlanta, GA
|
Posted: Tue Mar 26, 2002 10:48 pm Post subject: |
|
|
I agree with everything Les says. Now with that information in mind, if you like the idea of an electronic release, the batteries are still available. I would purchase a Super/Super Speed Graphic that comes equipped with the electronic lens boards. I would also make sure that the camera has been tested for all functions. There is wiring that runs through the bellows which often times fails with age. I had to replace my bellows 22 years ago for this reason. I do like the shutter release though, the slightest touch and the solenoid does the rest. It should be noted that the electronic bellows are still available and Fred Lustig is currently working on reproductions of the electronic lens boards. Hence, you will be in good shape if you want the camera to function as it was originally designed to do. |
|
Back to top |
|
|
|