View previous topic :: View next topic |
Author |
Message |
wlemann
Joined: 05 Aug 2002 Posts: 7 Location: St. Louis
|
Posted: Tue Aug 20, 2002 5:23 pm Post subject: |
|
|
Speed Graphic.
Lenses: 90 Prontar, 135 Schneider, 210 Caltar and 240 Schneder G Claron all mounted on proper boards.
My understanding: 210 and 240 focus only on ground glass using tripod. No use of infinity stops or scale on front of bed to left these two longer lenses.
90 and 135 calibrate the infinity stops for each lens and calibrate the scale on the bed by lining up the infinity marks on both sides.
Questions: Is what I have said above correct?
The instruction book indicates a need for different scales for each lens. Do I need a different scale for the 90 and 135 lenses?
Walter |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Tue Aug 20, 2002 6:02 pm Post subject: |
|
|
Yes, you do. Graflex optically measured each lens and then machined a focusing scale for it, therefore there may be 4 or 5 different scales for any marked focal length.
Getting the percise one these days will be difficult. I have a marked 135, scale for a 132, and it's off 6 inches at minimun end of scale, less elsewhere.
_________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
|
wlemann
Joined: 05 Aug 2002 Posts: 7 Location: St. Louis
|
Posted: Tue Aug 20, 2002 10:26 pm Post subject: |
|
|
what's more the 135 lens is not a graphic lens but a NEW schneider kreuznach. does this mean that there is no scale made for this lens?
with this i assume you remove both sides of the scale, right??? |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Wed Aug 21, 2002 4:19 am Post subject: |
|
|
Yes, the scale(s) are a two piece assyembly.
It should not matter who or when the lens was made, at 1.5% production tolerance a 135 will range from 132.975mm to 137.025mm. Using pacemaker cam list as a guide (focus scales matched) Graflex had 5 or 6 ranging from 132mm to 138mm. http://graflex.org/speed-graphic/top-rangefinder-cams.html
Others on this site have a list of the focus scales numbers (they're on the bottom side of the scale). Using an existing set of scales as a guide, a tripod, and carefull measurement, one could make a scale set.
Charles
_________________
While a picture may be worth a thousand words, a quality photograph is worth a million.
[ This Message was edited by: 45PSS on 2002-08-20 21:24 ] |
|
Back to top |
|
|
Les
Joined: 09 May 2001 Posts: 2682 Location: Detroit, MI
|
Posted: Wed Aug 21, 2002 2:19 pm Post subject: |
|
|
Now for a question you probably don't want to hear.
With the exception of having a camera "complete down to the last detail"
Why do you need focus scales? When you use your 35mm camera, do you ever guess focus estimating the distance and focus using the scales?
I have a Crown special with its original 135 scales, and I added a set for a 250mm. I've never used them once.
Now if you have a top rangefinder I can see scrounging for a cam. |
|
Back to top |
|
|
|