View previous topic :: View next topic |
Author |
Message |
jaymoussy
Joined: 27 Jun 2019 Posts: 4 Location: Eastern MA, USA
|
Posted: Mon Oct 17, 2022 8:18 pm Post subject: Kodak synchro-Rapid 800 frozen shutter release lever |
|
|
New to me Crown Graphic with 101 Ektar, Synchro-Rapid 800.
Shutter cocking works, but release lever does not.
I have it off camera, on the lensboard, for inspection.
Notes:
- flash synch is set to "M" position - I thought I read something about flash synch being problem-prone on these shutters(?)
- if I give the assembly a good slap in the palm of my hand (very technical), the cocked shutter then trips.
Any advice?
Odd timing... I finally found Ronsonoil at local shop, the other day!
EDIT: I did find this shutter series repair manual, but i need a few pointers before digging into that - mostly the don'ts! _________________ New to LF. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Henry
Joined: 09 May 2001 Posts: 1636 Location: Allentown, Pennsylvania
|
Posted: Tue Oct 18, 2022 4:59 pm Post subject: |
|
|
For the "Ronsonol soak," remove front and rear lens elements and douse (but don't drown!) the innards with the Ronsonol, working the shutter mechanism the while. Allow time for the works to dry (Ronsonol, AKA naphtha, evaporates rather quickly; I'd give it a half-hour just to be safe). Re-install lenses. Hopefully this will loosen up the old lubricant and get you back in business. Let us know. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jaymoussy
Joined: 27 Jun 2019 Posts: 4 Location: Eastern MA, USA
|
Posted: Tue Oct 18, 2022 6:40 pm Post subject: |
|
|
There should be a middle element in there, correct?
If this shutter is not repairable, that would be a shame because the Ektar lens has a decent reputation, and is in great condition. _________________ New to LF. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Henry
Joined: 09 May 2001 Posts: 1636 Location: Allentown, Pennsylvania
|
Posted: Tue Oct 18, 2022 6:49 pm Post subject: |
|
|
Whatever glass is in there, remove it.
For shutter service, try these folks: http://www.flutotscamerarepair.com
Last edited by Henry on Wed Oct 19, 2022 5:11 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
William Hallett
Joined: 07 Jan 2012 Posts: 93
|
Posted: Wed Oct 19, 2022 1:02 pm Post subject: |
|
|
I would exercise caution in using the "Ronsonol soak". It has been noted in other postings on this site that the result of this may be simply to distribute dirt throughout the shutter, putting it in places where you do not want it, in particular on the shutter and diaphragm blades. It may also attack plastic or rubber components in the shutter. And if the problem is mechanical (bent or worn levers or a missing spring) rather than simply dried out lubricant, it will not solve it.
I've not worked on a Synchro-Rapid myself, but I would suggest taking the cover plate off and operating the mechanism to see if you can localize the problem first. If you can identify the sticking component, it will at least allow you to concentrate the Ronsonol there rather than applying it everywhere. _________________ WilliamH |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|