View previous topic :: View next topic |
Author |
Message |
wiux
Joined: 04 Jun 2019 Posts: 42
|
Posted: Mon Apr 18, 2022 11:04 am Post subject: Tighten Rail Lock |
|
|
Does anyone know how to tighten the rail/focus lock (the tab/lever near the rails that can be turned 90 degrees to keep the focus from moving)? I tried tightening the screw, but it didn't seem to make much difference when it came to the rails. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Mon Apr 18, 2022 3:18 pm Post subject: |
|
|
Remove the left yoke guide, lift the yoke out of the bed, then restart the yoke lock lever at a different position is one possibility. The other is to remove the right yoke guide also, then add or replace the brass yoke lock pad.
https://graflex.org/manuals/45-Pacemaker-Speed-and-Crown-Graphic.pdf
pdf page 20. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
wiux
Joined: 04 Jun 2019 Posts: 42
|
Posted: Wed Apr 20, 2022 5:27 am Post subject: |
|
|
Success! Thanks for your help.
In case anyone comes across this thread later, make sure you apply tension on the brass strip springs by pressing down using the focus rollers (while simultaneously closing the bed/door part way). Was tearing out my hair trying to get the yoke guides back together before I realised what to do. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|