View previous topic :: View next topic |
Author |
Message |
pv17vv
Joined: 22 Dec 2001 Posts: 255 Location: The Ardennes, Belgium
|
Posted: Sat Dec 12, 2009 6:14 pm Post subject: All Ektars are not equal ! |
|
|
I own two 127 Ektars in factory-fitted Synchro-Compur shutter, both built anno 1956 assumingly by the same workers.
Recently #1 was away beeing CLA'd so I used #2.
I discovered Infinity Stops tuned for #1 were completely off for #2, so much I reflexedly checked if they were still solidly in screwed in place.
They were.
When the image on the GG was sharp at infinity, the arrow was in front of 50 ft on the focus scale.
Really a big difference...
|
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Sat Dec 12, 2009 10:18 pm Post subject: |
|
|
No two lens coming off any manufacturers line are the exact same. There will be slight differences to large differences depending on what tolerance the manufacturer is using.
Kodak ran good quality control but I do not know what tolerance they used. Using the cam list for the Pacemakers as a guide it appears to be 1.5% which results in a range of focal lengths from 125.095 to 128.905 for the 127mm Ektar assuming they used the same variance percentage for over and under.
Measure the actual rail movement from one lens at infinity to where the other is at infinity in Milli meters and that will be the difference in actual focal length of your lens.
When you adjust your side rangefinder you are adjusting it to you lens, not the labeled focal length so you are effectively measuring the lens actual optical length. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
|
glennfromwy
Joined: 29 Nov 2001 Posts: 903 Location: S.W. Wyoming
|
Posted: Sun Dec 13, 2009 10:24 pm Post subject: |
|
|
Lens manufacturers also use shims to adjust the lenses when fitting them to shutters. I know Kodak used this practice, though I've never run across one with shims. The shims bring the focus into tolerance. Reference material, such as the 1944 edition of Graphic Graflex Photography, et al, states that Ektar lenses should NEVER be removed from their shutter. That is probably due to the shims being lost. You can find out how much the one that's short is off compared to the long one by simply screwing out the front cell until it matches. That would be the thickness of the shim that doesn't exist. It really doesn't matter, though. choose one and adjust the rangefinder to suit. Put the other one on something else. _________________ Glenn
"Wyoming - Where everybody is somebody else's weirdo" |
|
Back to top |
|
|
pv17vv
Joined: 22 Dec 2001 Posts: 255 Location: The Ardennes, Belgium
|
Posted: Tue Dec 15, 2009 6:20 pm Post subject: |
|
|
Thank you for your replies.
Quote: | It really doesn't matter, though. choose one and adjust the rangefinder to suit. Put the other one on something else. |
Glenn, this is exactly was I intended to do. The lenses will be carefully packed and stored and the shutter will be put in reserve until I find something to screw into it. |
|
Back to top |
|
|
Mike1234
Joined: 10 Jan 2010 Posts: 12 Location: South Texas
|
Posted: Sat Feb 06, 2010 7:40 pm Post subject: |
|
|
I'll bet someone switched the wrong FL elements on the rear of one of the lenses. |
|
Back to top |
|
|
Dan Fromm
Joined: 14 May 2001 Posts: 2120 Location: New Jersey
|
Posted: Sat Feb 06, 2010 9:35 pm Post subject: |
|
|
Hmm. Why oh why oh why did Graflex supply more than one focusing scale for lenses of the same make, model, and nominal focal length?
Rhetorical question. Actual focal length = nominal +/- as much as 5%. That's why.
The difference in flange-to-film distance between "focused at infinity" and "focused at 50 feet" isn't very large.
Cheers,
Dan
Oh, yeah, I've told this story before but I'll tell it again. I once bought a bunch of aerial cameras that held, between 'em, 20 38/4.5 Biogons. These lenses' engraved focal length is 38 mm. Nominal, per Zeiss' documentation, is 38.5 mm. The camera manufacturer had measured, marked each lens with its actual focal length. The range was 38.3 - 38.8 mm. And these were very expensive lenses made about as precisely as possible for a highly exacting application. |
|
Back to top |
|
|
pv17vv
Joined: 22 Dec 2001 Posts: 255 Location: The Ardennes, Belgium
|
Posted: Sun Feb 07, 2010 7:37 am Post subject: |
|
|
Thanks for this precision Dan, very interesting as usual.
To close the topic, this lens #2 is at home on camera #2 and everything is OK, normally no need to put it on camera #1.
Georges |
|
Back to top |
|
|
|