View previous topic :: View next topic |
Author |
Message |
JBish130
Joined: 20 Oct 2004 Posts: 27 Location: Eastern US
|
Posted: Tue Dec 19, 2006 4:13 am Post subject: |
|
|
I've got some Wratten filters (75mm and/or 3 inch square). I've bought (haven't received yet) a Kenko 76mm filter holder.
This seems like it will work as far as holding the filters. I will have to devise some manner of connecting it in front of the lens, as well as figuring how to work a hood into the equasion.
The reason I'm headed in this direction, is because I've an assortment of older lenses and I don't really want to buy a bunch of adapters (not that all would be available or ??).
I'm hoping to utilize the hood mount screw at the top of the front standard on a GVI.
Has anyone already dealt with this issue with good results, and if so, how did you do it.
I'm hoping to avoid re-designing the wheel, or making mistakes if possible.
Any help?
_________________ Jeff Bishop
"It's light and nothing more." |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
t.r.sanford
Joined: 10 Nov 2003 Posts: 812 Location: East Coast (Long Island)
|
Posted: Wed Dec 20, 2006 5:03 pm Post subject: |
|
|
Do you have the not-quite-a-compendium swingup hood that was held in place by that screw? If so, you might attach some kind of carrier -- perhaps made of black mounting-board -- to the rear frame of the hood.
I seem to recall Calumet offering a gelatin filter adapter along those lines for their compendium hoods, four decades back. It always seemed like a good idea to me.
Absent the hood, I don't think it would be much of a problem to rig up some kind of short rail, anchored by the hood screw, with a filter adapter traveling along it. This could be as crude or as finished as you wished.
Or you might consider getting one of those adapter rings fitted with three radial screws, which can be used with any lens up to the actual diameter of the ring. Tiffen used to make these, up to quite large sizes.
You'll recall that the holders for DuPont "Varigam" and Kodak "Polycontrast" variable-contrast filters worked this way -- in fact, you could try one of those, if it would fit onto your largest-diameter lens. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
disemjg
Joined: 10 Jan 2002 Posts: 474 Location: Washington, DC
|
Posted: Sat Dec 23, 2006 7:40 pm Post subject: |
|
|
Kodak made a gadget called an adjustable filter holder for 3x3 filters; it has a spring loaded clamping action that will hold the device on the front of lenses ranging from about 1 1/2" to about 2 1/4 " in diameter. Old as dirt (pat. Aug 1915) but works like a charm. Check your local photo junk bin and you might luck out and find one.
While there is no provision for a hood, you could probably cobble up something basic using lightweight material like cardboard and hang it on the front.
[ This Message was edited by: disemjg on 2006-12-23 11:42 ] |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
JBish130
Joined: 20 Oct 2004 Posts: 27 Location: Eastern US
|
Posted: Wed Jan 03, 2007 12:38 am Post subject: |
|
|
I'm watching for a universal filter holder. However, if I come up with something that works, and possibly of interest to others, I will post it.
Thanks!
_________________ Jeff Bishop
"It's light and nothing more." |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|