View previous topic :: View next topic |
Author |
Message |
davidst
Joined: 17 Jul 2001 Posts: 4 Location: Minnesota
|
Posted: Tue Jul 17, 2001 7:38 pm Post subject: |
|
|
I've seen numerous references to a modification that can be done to a speed graphic so that I can use the Graflok back but have been unable to find anyone that can summarize the procedure and/or share advice. One of the questions I asked when purchasing was related to interchangable backs and was told flatly that there was no possibility. Can you help prove them wrong?
Thanks,
Todd |
|
Back to top |
|
|
jdman
Joined: 13 May 2001 Posts: 302 Location: Midwest
|
Posted: Wed Jul 18, 2001 3:00 am Post subject: |
|
|
A Graflok, graflex, or spring back will all fit a speed graphic. There are 5 screws holding the spring back on. and if you put a crown Graflok back on you use the 4 main screws. Takes about 2 minutes to do this job. The problem is finding a Graflok back at least in 2x3 which I use. Do not waste your time on the graflex back as it is an oddball for film holders. Russ |
|
Back to top |
|
|
|