View previous topic :: View next topic |
Author |
Message |
luisalegria
Joined: 13 Jun 2012 Posts: 5 Location: San Francisco California
|
Posted: Thu Jun 14, 2012 12:20 am Post subject: Graflex 3A Rebuild - help ? |
|
|
Thanks very much to 45PSS - my neighbor in the SF Penninsula !
This is a great help.
http://graflex.org/helpboard/viewtopic.php?t=6131
I am working on a VERY bad 3A
Just started on it but I think I know the way forward on most of its problems. Currently its almost 100% disassembled.
My worst problems now (famous last words) are to make and install a new bellows. I cut the wreck of the old bellows off, but once I have the new one made I need to stick it back on again. It seems its held on the internal bellows frame by a screwed on bracket - with the screws inside the bellows. It would be difficult to say the least to try to screw this bracket back in place with the bellows frame still in the camera. Best to take the frame out and attach the bellows while its outside.
But for the life of me I can't see how to take this thing out of the camera. Its got these sheet metal wings attached to it on the sides, and on the bottom its connected to a metal/felt sheet that is intended as a lightseal (I think).
The front standard bellows attachment is nearly as troublesome. They did not design these things for easy service, unlike the Speed Graphics.
Also, the hood is fine, but I need to remove it to reposition/adjust the groundglass. It seems to be held on by screws holding the hood frame, but these are inside the hood. Inconvenient is putting it mildly. I expect I could unscrew this thing with some work, but putting the hood back on again will be a challenge.
Any suggestions ? |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Thu Jun 14, 2012 2:05 am Post subject: |
|
|
Look at the disassembly instructions again. I think you are missing something. The view hood retainer is external of the view hood, the internal screws are the ground glass frame screws.
The bellows are held to the front standard via screws accessed from the rear of the bellows. With the bellows extended they should be apparent.
The fuzzy scans of the original design drawings may be of some help also.
http://lommen9.home.xs4all.nl/index.html >world of graflex>3A or Graflex Cameras> 3A.
http://lommen9.home.xs4all.nl/Nieuw%20Graflex/links.htm _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
|
luisalegria
Joined: 13 Jun 2012 Posts: 5 Location: San Francisco California
|
Posted: Thu Jun 14, 2012 10:54 pm Post subject: |
|
|
This camera has already been much modified by an earlier owner (including having the entire back replaced), so I am coming to the conclusion that the last guy probably just glued down the hood. There is no visible hardware, springs or catches or the like, in the "well" around the outside of the hood leather. I have two other Graflexes where its obvious how to remove the hood, and this one has nothing like that. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|