Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

top rangefinder rescue

 
Post new topic   Reply to topic    Graflex.org Forum Index -> Speed Graphic Help
View previous topic :: View next topic  
Author Message
Ron Hanes



Joined: 07 Feb 2002
Posts: 9
Location: Oklahoma

PostPosted: Tue Mar 05, 2002 1:25 pm    Post subject: Reply with quote

First of all:Thanks everyone for your suggestions they all were needed in my case. The diagram offered at another site showeed me what I had in there , and the remarks about the "little balls an rods told me what to expect. Heres what I did: I placed the whole camera in a large tray to catch stray parts. then I removed the plastic cap and carefully removed that plunger. It was indeed bent. I straightened it and then shot some 2-26 spray lube (safe will not hurt plastic)in the tube then re assembled the tube contents and replaced the cap, still poor results so I removed the cam cover and found it needed the recommended "Flick of the fingernail which I did. Then I applied a micro drop of 2-26 to all pivot points and now "Shes a workin justa fine"...my sincere thanks to all......ron H.(im now a trained rangefinder resue tech thanks to you all)

_________________
Ron Hanes revron_1@hotmail.com
922 E. Moses
Cushing,Ok.74023
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Speed Graphic Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group